Subli Glaze™ is the only do-it-yourself sublimation coating solution that is designed to enable sublimation decoration on a whole range of surfaces such as ceramic, wood, glass, plastic, metal or stone. Coat substrates quickly and easily, making almost any surface sublimation ready, expanding your creative options and product range with these exceptional value coatings.
Subli Glaze™ Sublimation Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Sublimation Coating the image will not transfer.
With Subli Glaze™ you can sublimate onto dark, or black substrates, and it also protects against U.V degradation. Its aerosol spray can is designed for ease of use and easy application.
Subli Glaze UV Protection Coating
Subli Glaze™ UV Protection sublimation coating can be applied at the end of the sublimation process – after the image has been transferred, to add a layer of protection against ultraviolet radiation. Exposure to ultraviolet light can over time cause image fade; Subli Glaze™ UV Protection Coating reduces the effects of UV image fade.
Subli Glaze Adhesion Promoter
When you are applying your chosen Subli Glaze™ product to any hard substrate with a smooth surface such as metal, glass or acrylics, Subli Glaze™ Adhesion Promoter is first required to allow your chosen Subli Glaze™ product to bond effectively to the substrate. Prevents separation of coating and substrate after pressing.
How to use Subli Glaze Sublimation Coating Sprays
- Shake the can well for 1 minute.
- Ensure the surface to be coated is clean, dry, and free from grease.
- If applying to a polished glossy surface, prime with Subli Glaze™ Adhesion Promoter.
- Apply in an even motion holding the can approx. 250mm (10?) from surface using light passes over the substrate at room temperature.
- Allow substrate to air dry for 5 minutes then cure in an oven at 160°C (320°F) for 15-20 minutes.
- Provide a solid white background on which to transfer an image.
- Maximise the effect of the transfer of the image.
- 400ml aerosol spray
- 2-3sq metre coverage
This product was previously known as ‘Digi Coat’and has been re-branded to ‘Subli Glaze’.
Also available in the Subli Glaze range:
Subli Glaze Translucent Coating – [Click here]
Subli Glaze™ Translucent sublimation coating is used when working with clear substrates such as glass or acrylics, where the image needs to be transferred to the back of the substrate, allowing light to pass through it. Subli Glaze™ Translucent White Coating is applied after Subli Glaze™ Clear Coating is applied. The image transfers through the white coating so when viewed from the correct side the image has a white background.
Subli Glaze Clear Coating – [Click here]
Subli Glaze™ Clear sublimation coating is suitable for use on ceramic, metal, wood, glass and slate giving you a glossy finish.
Subli Glaze Opaque White Coating – [Click here]
Subli Glaze™ Opaque White sublimation coating is used when working with dark coloured substrates or substrates that do not allow any light to pass through them. Subli Glaze™ opaque white coating is applied before the Subli Glaze™ Clear coating to give the substrate a white background on which to transfer the image. Suitable for use on metals, glass, ceramic, and certain plastics.
Subli Glaze Matte Coating – [Click here]
Subli Glaze™ Matte sublimation coating gives you a satin / matte finish. Use Subli Glaze™ Matte Sublimation Coating to provide a polymer layer which sublimation inks can bond to allow effective image transfer.